Vehicle Recall Check
Electronic stability control

BMW electronic stability control recall — 24V739000

BMW of North America, LLC reported recall 24V739000 to NHTSA on October 2, 2024.

Electronic stability control

24V739000

Official NHTSA text (English)

Defect summary

BMW of North America, LLC. (BMW) is recalling certain 2023-2024 X1, X5, X6, X7, XM, 530i, i5, 740i, 760i, i7, and 750e vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.

Consequence

A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, malfunctioning ABS and/or DSC systems can cause a loss of vehicle control. Either of these scenarios can increase the risk of a crash.

Remedy

Dealers will replace the integrated brake module, free of charge. Interim owner notification letters notifying owners of the safety risk are expected to be mailed November 22, 2024. Second letters will be mailed once the parts are available. Owners may contact BMW customer service at 1-800-525-7417. Vehicles in this recall were previously repaired under recall number 24V-104 and will need to have the new remedy completed.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

ManufacturerBMW of North America, LLC
ComponentELECTRONIC STABILITY CONTROL (ESC)
Campaign number24V739000
MakeBMW
Model year2023–2024
Report receivedOctober 2, 2024
Source: NHTSA — National Highway Traffic Safety Administration
Campaign number: 24V739000 · Report received: October 2, 2024
https://www.nhtsa.gov/recalls?nhtsaId=24V739000

What does this record mean?

BMW of North America, LLC reported recall 24V739000 to NHTSA on October 2, 2024. The record falls under electronic stability control and covers 8 make-model-year combinations across BMW, model years 2023–2024.

A recall is the manufacturer identifying a safety-related defect or a non-compliance with a standard in a group of vehicles, and reporting it officially. It does not mean the whole vehicle is faulty: it covers a specific condition found in a specific part, within a specific build range.

This record concerns driver assistance systems: stability control, collision avoidance, lane keeping, the rear view camera or the communication module. These systems support the driver; they do not replace the driver.

What should I do?

If the screen shows no image, the system activates unexpectedly, or a related warning appears on the dashboard, contact the dealer. For a good share of records in this family the remedy is a software update, and on some vehicles it can be delivered over the air.

Work carried out under a recall is done at no cost to the owner. This does not depend on the vehicle still being in warranty: a recall is not a warranty claim, it is a separate obligation. The dealer should not charge you for labour or parts.

Whether a record covers your vehicle is determined by make, model and model year — but not every vehicle of that model year is necessarily included. The manufacturer usually covers a specific build date range. Only a VIN-based lookup gives a definite answer.

Where is the VIN?

The VIN has 17 characters and appears in four places: on a plate at the lower left corner of the windscreen, on the label inside the driver's door jamb, on the registration document, and on most vehicles on a label in the engine bay. VINs never use the letters I, O or Q; the similar-looking characters are the digits 1, 0 and 9.

Before you go to the dealer

The work is done at the manufacturer's authorised dealer. Quoting the campaign number when you book shortens the process, because the dealer can order the part in advance. If you are not sure whether your vehicle is covered, verify it on the manufacturer's own VIN lookup page; that link is provided on this page.

Before you go to the dealer, have three things ready: the VIN, the registration document and the campaign number. If you have seen a symptom related to the defect, note when and under what conditions; that speeds up diagnosis. Keep the paperwork showing the work that was done: it is useful when you sell the vehicle or if a second record appears.

Source and currency

The official text on this page is reproduced exactly as NHTSA published it. It has not been summarised, rewritten or interpreted. The rest of the page is written in this language.

NHTSA records cover vehicles sold in the US market. A model with the same name sold in Europe or elsewhere may have been built with different equipment and different suppliers, so whether a record covers your vehicle is settled only by the manufacturer's own lookup.

When a record stops appearing in the source, this page is taken down the same day and the address returns a 410 response; no text is left behind. If you have an objection about a record, you can send it from the correction page.

Frequently asked

What does recall 24V739000 cover?

The record falls under electronic stability control and covers vehicles from BMW in model years 2023–2024. The detail is in the official text on this page.

How do I know if my vehicle is included?

If make, model and model year match, your vehicle may be included; but the manufacturer usually covers a specific build date range. Only a VIN lookup gives a definite answer.

Is there a charge?

No. Recall work is free of charge and independent of warranty.

How soon should I have it done?

There is no reason to wait. If a part has to be ordered the dealer will give you a date; in the meantime follow the advisories shown on this page.

Why is the official text in English?

Because that is the record NHTSA published. It is not summarised, rewritten or interpreted; the rest of the page is in this language.

Manufacturer's own VIN lookup page